Skip to content

Roller Blinds

Semi Blackout Roller Blind

Semi BlackoutBedroomLiving RoomOffice

From৳105per sq ft

  • Blocks most daylight without the stiff coated backing of full blackout.
  • Reads as evening at midday — enough for sleep, not so dark you lose the room.
  • Cut to your measured size and motorisable on remote or WiFi.

Price your window in 30 seconds

Enter the window size. The price updates as you type.

Measurement unit
Colour

Enter the window size. The price updates as you type.

Get this blind priced

An estimate, not a final invoice. We confirm the price after measuring on site. Prices exclude VAT at 7.5%.

Semi Blackout Roller Blind

Semi blackout sits between light filtering and full blackout: a dense fabric that stops most of the daylight but is not coated to kill all of it. Lowered at midday the room reads as evening rather than night, which is what most people actually want in a bedroom they also use during the day.

It is the practical middle choice. You keep the softness of a fabric blind and lose the sealed, lights-out feeling of true blackout, and you avoid the coated back that makes blackout fabric stiff to handle.

Semi Blackout: Blocks most light. A thin outline may show at the edges of the blind.

Specifications

Specifications
MaterialPolyester
Light controlSemi Blackout
OperationBead Chain · Motorised
Width range12–144 in
Drop range12–120 in
Minimum billable area20 sq ft
MotorisedRemote control · WiFi / app
Lead time3 days, 5 with a motor
Warranty6 months on the fabric. 6 months on the mechanism. 6 months on the motor.
Single-piece width limit96 in

Care and cleaning

Vacuum both faces monthly. Spot-clean with a barely damp cloth and leave the blind down until dry. Do not soak.

Frequently asked questions

My blackout blind still lets light in at the edges. Why?
Because "blackout" describes the fabric, not the installation. The cloth itself passes no light, but a blind mounted inside the reveal must be cut a few millimetres narrower than the opening in order to move, and daylight finds that gap. If total darkness is the goal, mount outside the frame with a two to three inch overlap on each side and a deeper drop below the sill. Say so before we measure and we will size it that way from the start.
How do I clean a roller or zebra blind?
Lower the blind fully and go over both faces with a vacuum brush head or a dry microfibre cloth, top to bottom. Do that monthly and Dhaka dust never builds into a grey film. For a mark, dab with a barely damp cloth and mild soap, then leave the blind down until it is completely dry — rolling up a wet blind is what causes streaks and a musty smell. Never soak the fabric, never scrub, and never machine-wash a blackout blind: the coating on the back is what blocks the light and it will crack.
Do I measure inside the window frame or outside it?
Both are valid, and they give different results. An inside (reveal) mount looks tidier and keeps the sill usable, but a little light always escapes at the edges. An outside mount overlaps the frame by two to three inches on each side and is the only way to get a genuinely dark bedroom. Tell us which you want and measure accordingly — our /measure guide walks through both with the exact points to record.
Will the fabric fade in direct Dhaka sun?
Every fabric fades eventually under direct sun; the question is how fast and how evenly. Solution-dyed polyester and sunscreen mesh hold colour far better than printed cotton-look fabrics, and mid tones show fading less than deep navy or black. A west or south-west window is the harshest position in a Dhaka flat, so if that is where the blind goes, choose a lighter mid tone and expect the visible side to soften slightly over several years rather than patch unevenly.

You may also like

Also works in this room

We install here

CallWhatsAppQuote